ECHA Backs an EU-Wide Chromium VI Restriction: What Leather Jacket Buyers Must Verify Next
- Share
- publisher
- Melvin
- Issue Time
- Nov 20,2026
Summary
On November 19, 2026, the European Chemicals Agency's Committee for Socio-Economic Analysis adopted its final opinion supporting an EU-wide restriction on certain chromium(VI) oxides, oxyacids and salts. The file now passes to the European Commission, which will draft the restriction for a vote by EU member states.

On November 19, 2026, the European Chemicals Agency's Committee for Socio-Economic Analysis adopted its final opinion supporting an EU-wide restriction on certain chromium(VI) oxides, oxyacids and salts, ending the scientific stage of a file that now passes to the European Commission and, later, to a vote by EU member states.
The decision reaches further than the tanning drum. For buyers sourcing leather jacket programmes for Europe, chromium(VI) also sits in plating baths, pigment systems and anticorrosive coatings applied to hardware, and it can be tested on finished leather before shipment.
What SEAC Concluded
SEAC found that two restriction options are proportionate at EU level, provided that appropriate transition periods apply. It judged the more ambitious of the two, option 2, to strike the best balance between reducing exposure to carcinogenic substances and the socio-economic cost of the change, and considered stricter options unlikely to be proportionate.
The committee recommends a transition period of at least 36 months, and together with the Committee for Risk Assessment calls for guidelines to support implementation and enforcement. Both committees have now completed their scientific evaluation. The opinions will be finalised and sent to the Commission in the coming weeks, according to ECHA's announcement of the final opinions.
The substances covered are known carcinogens. With the exception of barium chromate, they are identified as Substances of Very High Concern and appear on the REACH Authorisation List. The Commission asked ECHA to prepare the proposal in 2023, and the risk assessment committee adopted its final opinion earlier in 2026.
Where Chromium VI Touches a Leather Jacket
Metal finishing is the most direct exposure. Chromic acid is used to electroplate chromium onto metal parts to provide a decorative or protective coating, according to the US Occupational Safety and Health Administration. Zipper sliders, snaps, rivets and buckles are commonly plated, and chromium compounds also appear in anticorrosive surface coatings.
Pigments and coatings are the second route. Chromium(VI) compounds can serve as pigments in dyes, paints, inks and plastics, and as anticorrosive agents in paints, primers and other surface coatings. On a jacket, that covers edge paint, hardware lacquer and painted or printed trim.
The leather itself is measured rather than assumed. ISO 17075-1 and ISO 17075-2 set out colorimetric and chromatographic methods for chromium(VI) in leather, both able to quantify down to 3 mg/kg across all leather types. ISO 10195 adds a thermal pre-ageing step that indicates how prone a leather is to form chromium(VI) under specified conditions.
The 36-Month Window and Sourcing Calendars
Nothing changes on a purchase order this week. The opinion is advice to the Commission, which will draft the restriction for the REACH Committee of member states, and an Annex XVII entry takes effect only after that vote. The 36-month figure is a recommended minimum transition, not a fixed date.
That window is still short for hardware. A finish change rarely stops at chemistry: plating thickness, colour tone and salt-spray performance move together, and a new passivation system has to be re-sampled against the approved trim before production approval. Buyers developing autumn 2027 and spring 2028 ranges are inside the period when those choices will be locked.

What to Put in the Next RFQ
Four documents close most of the gap. A chromium(VI) test report for each leather colour and tannery lot, quoting the ISO 17075 method and stating the quantification limit. A written finish declaration for every metal component, naming plating and passivation chemistry rather than only colour.
Two more complete the set. A pigment and coating declaration for edge paint and lacquer, and lot-level traceability that matches a hardware batch to a delivery.
Buyers comparing men's leather biker jackets should request the same four items, in the same format, from every supplier. Comparable declarations are what make a sourcing decision defensible later, when a market surveillance authority or a retail customer asks for the file. An earlier report on EU lead restrictions on metal hardware followed the same logic for a different substance.
Frequently Asked Questions
Does the opinion ban chromium VI in leather jackets immediately?
No. This is the final scientific opinion in a restriction process. The Commission will propose the restriction, member states will vote in the REACH Committee, and the measure enters Annex XVII only after that. SEAC recommends a transition period of at least 36 months.
Which test should a buyer request for leather?
Ask for ISO 17075-1 or ISO 17075-2 results with the quantification limit stated, since both methods quantify down to 3 mg/kg. Add ISO 10195 thermal pre-ageing where goods will be stored or shipped in warm, humid conditions.
Are zippers and snaps covered by the file?
The opinion concerns certain chromium(VI) oxides, oxyacids and salts rather than finished garments. Because chromic acid is used in chromium electroplating, hardware finishing is the part of a jacket bill of materials most directly exposed to a change in supply. Ask suppliers which chemistry they use.
Working With Danke
Danke, the trading name of Dalian Danke Fashion Co., Ltd, manufactures leather jackets for B2B buyers from Dalian, China. Leather and hardware specifications are confirmed per style, and test documentation is assembled against the approved specification sheet before a quotation is issued.
For current material options, hardware finishes and document availability, review the leather jacket range at www.dankeleatherjacket.com or contact the team on WhatsApp +86 13234076432.